May 18th 2024
Starting now, SFCreation will stop manufacturing lift kits and bodylifts. Once the current inventory of raw material
is machined, there will be no more. The fact of the matter is that machining these spacers and bodylift pucks takes a lot of time.
Some of you that known me for a long time know that I have a full time job on top of So after many years of spending my week-ends machining, I have decided to give myself a more regular week schedule with some free time.This will give me also some time to hopefully bring to life new products that I always wanted to bring to market but had no time to fully develop.

So if you were planning on buying a lift kit or a bodylift kit, now is the time until there is no more. Expect the products to start disapearing from the website as the inventory dry up.

The skidplates and crosslink will still be available and manufactured in the future.


R50 – 2.5-2 Lift Kit (2.5″-2″) (96-04)

Original price was: $165.00.Current price is: $137.00.

Options Total: $ 0

SHIPPING ** Must match your shipping Country/Continent ***

SKU: r502.5-2kit Category:


All our prices are in US Dollars even though we are based in Canada. This decision has been made long time ago in order to prevent the many emails we were receiving asking us what would this Canadian price equals in (put you favorite currency here). It became obvious that for international sales, the US dollar currency was more appropriate and widely accepted. Be aware that our prices have been adjusted for this US currency. You can read more here :    

Our biggest seller Lift Kit for the pathfinder.

Provides 2.5″ in front and 2″ in rear of Lift.

The front spacers install on top of the struts. They are already threaded for easy installation. They  come with all the hardware that you need (bolts of proper length, washers and EZ-lock Nylon Nuts ). The Front spacers are 2″ high. Because of the very nature of the IFS (Independant Front Suspension) of the Pathfinder, you will get 2.5″ of Lift.


Being fully threaded, these spacers are the easiest to install as you will not need chemical fastener or have to weld the bolts to the strut plate. Simply dis-assemble the strut, remove the existing stud and rebuild with the included hardware by threading the spacer to the top plate.


For the rear one, they will not need any bolting or welding. Simply lift your rear coils and insert them between the coils and the coil seat.


They will not rust and will not add too much extra weight on your truck. Simply the easiest way to raise your rear up 2 inches.


All our spacers are fully modular, meaning you can add or remove the spacers in order to get the height that you want with predictable results !


CNC Precision made from HDPE (High Density PolyEthylene) in CANADA !


What you get :

2 pairs of Front 1″ strut spacers

6 3.5-inches Tap bolts  3/8

12 flat washers

6 EZ-Lock Nylon Nuts

2 pairs of Rear 1″ spacers

* Please allow up to 5 business days for processing and packaging *

*** Like with any lift kit, your truck will need a post lift alignment. In order to correct the camber adjustment, we recommend you get a pair of 14mm camber bolts. They can be bought online at many parts stores or you can have your mechanic take care of it ***

Click for Installation Procedure !